Date: Thu Oct 29 14:43:47 2009 ** **Back to Contents ** ------------------------------------------------------------------------ **

Author: Thomas Senior

Subject: Re: Vacuum Bazooka and clear PVC

Post:

--0-1197011068-1256840729=:58275
Content-Type: text/plain; charset=us-ascii

Very neat Cliff.
Could you explain the benefit of the the arrow head for puncturing the tape?
Tom



________________________________
From: David Kardelis
To: "tap-l@lists.ncsu.edu"
Sent: Thu, October 29, 2009 12:58:13 PM
Subject: Re: [tap-l] Vacuum Bazooka and clear PVC

Thanks, Cliff. Arrow heads I got. Thought it was funny that you were using a Broadhead to puncture the tape.

I'll have to see if can find some pvc rod.

dave



-----Original Message-----
From: tap-l-owner@lists.ncsu.edu [mailto:tap-l-owner@lists.ncsu.edu] On Behalf Of cbettis@unlserve.unl.edu
Sent: Thursday, October 29, 2009 11:47 AM
To: tap-l@lists.ncsu.edu
Subject: Re: [tap-l] Vacuum Bazooka and clear PVC

David,

The pipe was McMaster-Carr 49035K87. The pipe unions used to make the
end flanges 4881K65. The valve was a Nibco mss sp-110. The feet and
valve brace were made of 1/2 inch Delrin sheet. The collar was made
from 3.5 inch PVC rod. The can holder was mde of particle board and
steel rods. The arrow point was bought from Cabela's XK-416364.

Cliff

Quoting David Kardelis :

> Was just planning on making this. Do you have a parts list for the
> PVC/Vacuum valves etc.
>
> Thanks dave
>
> From: tap-l-owner@lists.ncsu.edu [mailto:tap-l-owner@lists.ncsu.edu]
> On Behalf Of Wayne Easterling
> Sent: Thursday, October 29, 2009 10:03 AM
> To: tap-l@lists.ncsu.edu
> Subject: Re: [tap-l] Vacuum Bazooka and clear PVC
>
> Hi Cliff,
> Very nice setup! What was used for the collar that the
> vacuum line threads into? It looks to be ABS that you needed to
> machine some.
> Wayne
>
> ________________________________
> From: tap-l-owner@lists.ncsu.edu [mailto:tap-l-owner@lists.ncsu.edu]
> On Behalf Of cbettis@unlserve.unl.edu
> Sent: Thursday, October 29, 2009 8:33 AM
> To: tap-l
> Subject: [tap-l] Vacuum Bazooka and clear PVC
>
>
> I wanted to let you all know that McMaster-Carr is now selling the
> clear PVC pipe in 8 foot lengths so you can make a bazooka with just
> a single length of it. Here is a picture of my implementaion:
>
> https://physicslearning2.colorado.edu/image/displayimage.php?album=4&pos=1
>
> This is the vacuum valve:
>
> https://physicslearning2.colorado.edu/image/displayimage.php?album=4&pos=2
>
> This is the arrow point I use to puncture the tape:
>
> https://physicslearning2.colorado.edu/image/displayimage.php?album=4&pos=0
>
> This the container I use for safe storage of the arrow point:
>
> https://physicslearning2.colorado.edu/image/displayimage.php?album=4&pos=3
>
> Using photogates, I measured the ping pong ball's exit velocity.
> With just a puff of breath propelling it, it was 6 m/s; using the
> vacuum pump and the pressure of the inrushing atmosphere when the
> tape is punctured, it was 300 m/s.
>
> Cliff
>



--0-1197011068-1256840729=:58275
Content-Type: text/html; charset=us-ascii

**
**Very neat Cliff.**
** Could you explain the benefit of the the arrow head for puncturing
the tape?**
**Tom**
**
**
**
------------------------------------------------------------------------
*From:* David Kardelis
*To:* "tap-l@lists.ncsu.edu"
*Sent:* Thu, October 29, 2009 12:58:13 PM
*Subject:* Re: [tap-l] Vacuum Bazooka and clear PVC

Thanks, Cliff. Arrow heads I got. Thought it was funny that you were
using a Broadhead to puncture the tape.

I'll have to see if can find some pvc rod.

dave



-----Original Message-----
From: tap-l-owner@lists.ncsu.edu
[mailto:tap-l-owner@lists.ncsu.edu ]
On Behalf Of cbettis@unlserve.unl.edu
Sent: Thursday, October 29, 2009 11:47 AM
To: tap-l@lists.ncsu.edu
Subject: Re: [tap-l] Vacuum Bazooka and clear PVC

David,

The pipe was McMaster-Carr 49035K87. The pipe unions used to make the
end flanges 4881K65. The valve was a Nibco mss sp-110. The feet and
valve brace were made of 1/2 inch Delrin sheet. The collar was made
from 3.5 inch PVC rod. The can holder was mde of particle board and
steel rods. The arrow point was bought from Cabela's XK-416364.

Cliff

Quoting David Kardelis >:

> Was just planning on making this. Do you have a parts list for the
> PVC/Vacuum valves etc.
>
> Thanks dave
>
> From: tap-l-owner@lists.ncsu.edu
[mailto:tap-l-owner@lists.ncsu.edu ]
> On Behalf Of Wayne Easterling
> Sent: Thursday, October 29, 2009 10:03 AM
> To: tap-l@lists.ncsu.edu
> Subject: Re: [tap-l] Vacuum Bazooka and clear PVC
>
> Hi Cliff,
> Very nice setup! What was used for the collar that the
> vacuum line threads into? It looks to be ABS that you needed to
> machine some.
> Wayne
>
> ________________________________
> From: tap-l-owner@lists.ncsu.edu
[mailto:tap-l-owner@lists.ncsu.edu ]
> On Behalf Of cbettis@unlserve.unl.edu
> Sent: Thursday, October 29, 2009 8:33 AM
> To: tap-l
> Subject: [tap-l] Vacuum Bazooka and clear PVC
>
>
> I wanted to let you all know that McMaster-Carr is now selling the
> clear PVC pipe in 8 foot lengths so you can make a bazooka with just
> a single length of it. Here is a picture of my implementaion:
>
> https://physicslearning2.colorado.edu/image/displayimage.php?album=4&pos=1
>
> This is the vacuum valve:
>
> https://physicslearning2.colorado.edu/image/displayimage.php?album=4&pos=2
>
> This is the arrow point I use to puncture the tape:
>
> https://physicslearning2.colorado.edu/image/displayimage.php?album=4&pos=0
>
> This the container I use for safe storage of the arrow point:
>
> https://physicslearning2.colorado.edu/image/displayimage.php?album=4&pos=3
>
> Using photogates, I measured the ping pong ball's exit velocity.
> With just a puff of breath propelling it, it was 6 m/s; using the
> vacuum pump and the pressure of the inrushing atmosphere when the
> tape is punctured, it was 300 m/s.
>
> Cliff
>





**
**


--0-1197011068-1256840729=:58275--

From tap-l-owner@lists.ncsu.edu Thu Oct 29 14:43:47 2009
**

**

Back