Date: Fri Mar 20 09:55:40 2009
Back to Contents
Author: Bill Norwood
Subject: Re: Heath Solenoids
Post:
This is a multi-part message in MIME format.
------=_NextPart_000_0020_01C9A940.3B223B30
Content-Type: text/plain;
charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Just fixing the thread title, Bill
_____
From: tap-l-owner@lists.ncsu.edu [mailto:tap-l-owner@lists.ncsu.edu] On
Behalf Of George Herold
Sent: Friday, March 20, 2009 9:31 AM
To: tap-l@lists.ncsu.edu
Subject: Re: [tap-l] Heath Solinoids
You really want a lathe with a back gear, engaging the back gear will make
the lathe turn nice a slow. This is perfect for winding coils. Set up the
wire spool on a axle and you are all set to wind a number of coils.
George Herold
_____
From: tap-l-owner@lists.ncsu.edu [mailto:tap-l-owner@lists.ncsu.edu] On
Behalf Of Bernard Cleyet
Sent: Thursday, March 19, 2009 4:42 PM
To: tap-l@lists.ncsu.edu
Subject: Re: [tap-l] Heath Solinoids
Yes. It was sold many times.
I suggest winding your own.. Easy, if you have a lathe.
bc builder of many Heath Kits, including the amp. pictured in the page
linked below.
Here's the History;
http://en.wikipedia.org/wiki/Heathkit
On 2009, Mar 19, , at 13:17, Carter, Tom wrote:
Does anyone know if the Heath Company catalog was purchased by someone?
I can't seem to find them in Pasco, ect. Anyone have any other suggestions
for physically large solenoids like this?
Thanks all.
Tom
------=_NextPart_000_0020_01C9A940.3B223B30
Content-Type: text/html;
charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
Just fixing the thread title, = Bill
=
------------------------------------------------------------------------
*From:* tap-l-owner@lists.ncsu.edu
[mailto:tap-l-owner@lists.ncsu.edu] *On Behalf Of *George Herold
*Sent:* Friday, March 20, = 2009 9:31 AM
*To:* = tap-l@lists.ncsu.edu
*Subject:* Re: [tap-l] = Heath Solinoids
You really want a lathe with a back gear, engaging = the back gear
will make the lathe turn nice a slow. This is perfect for = winding
coils. Set up the wire spool on a axle and you are all = set to wind
a number of coils.
George Herold
------------------------------------------------------------------------
*From:* = tap-l-owner@lists.ncsu.edu
[mailto:tap-l-owner@lists.ncsu.edu] *On Behalf Of *Bernard Cleyet
*Sent:* Thursday, March 19, = 2009 4:42 PM
*To:* = tap-l@lists.ncsu.edu
*Subject:* Re: [tap-l] = Heath Solinoids
Yes. It was sold many times.
I suggest winding your own.. Easy, if you have a = lathe.
bc builder of many Heath Kits, including the amp. = pictured in the
page linked below.
Here's the History;
http://en.wikipedia.org/wi= ki/Heathkit
On 2009, Mar 19, , at 13:17, Carter, Tom = wrote:
&= nbsp; Does anyone know if the Heath Company catalog was
purchased by someone? I can't seem to find them in Pasco, ect.
Anyone have = any other suggestions for physically large solenoids
like = this?
= Thanks all.
&= nbsp; &n= bsp; &nb= sp; &nbs=
p; = ; = Tom
------=_NextPart_000_0020_01C9A940.3B223B30--
From tap-l-owner@lists.ncsu.edu Fri Mar 20 09:55:40 2009